Operating System Support
Windows® 95/98/ME/2000/XP
Windows® NT 4.0
Data Modem
V.90 & K56flex (up to 56Kbps receive)
V.34 (33,600 bps - 2,400 bps)
V.32bis (14,400 bps - 4,800 bps)
V.32 (9,600 bps - 4,800 bps)
V.22bis (2,400 bps - 1,200 bps)
V.22 (1,200 bps)
V.23 (75/1,200-600 bps)
V.21 (300 bps)
Bell 212A (1,200 bps)
Bell 103 (300 bps)
Error Correction
V.42, LAP-M & MNP 2-4
Data Compression
V.42bis & MNP 5
Fax Modem
Group III, Class 1
Class 1 fax error correction mode
V.17 (14,400/12,000 bps)
V.29 (9,600/7,200 bps)
V.27ter (4,800/2,400 bps)
V.21 (300 bps)
Voice Modem Option
Speaker Phone
Full-duplex w/acoustic and line echo cancellation
Microphone AGC and muting
Software volume control
Music on hold
Record voice call
Flash-hook
Manual keypad dialing
Answering Machine Option
8kHz PCM and IMA ADPCM
Concurrent DTMF detection
Voice/Silence detection
Video Phone Ready Modem
V.80 sync access mode interface
Transparent & framed sub-modes
Voice call first Supports Intel Video Phone with ProShare® technology
Adaptive Connection Support
V.8 automode negotiation
V.8 PRIME & V.8bis
Adaptive Rate Renegotiation
Automatically adjusts speeds up and down to accommodate changing line conditions
Power Management
ACPI (D0-D3 states)
PME pin, 3.3V aux. supply
Wake PC from D3 Cold
Power Consumption
Sleep mode: 8 mW
Idle Mode: 370 mW
Operating Mode: 390 mW
Extensive Diagnostics Support
AT&V, AT#UD- Call setup and phone line quality statistics
Realtime modem status with connect rate and retrain indication
Last disconnect reason
Local Analog Loopback (LAL)-Hardware board check
Other Telephony Features
Tone Detections:
Dial tone, second dial tone Ring back, Busy Data/fax answering tones
DTMF
Enhanced Caller ID (U.S. and Canada)
Supports name and number
Distinctive Ring
Distinguish among data,fax,voice
Extra RJ11 jack
Supports external analog devices
US/Canadian Regulatory Approvals
Broad international approvals
Windows Control Panel Applet
Familiar Windows tabular interface
Easy to use on-line users guide
Real-time modem status
Essential product support information
Minimum System Requirements
150MHz Pentium® Processor
233MHz AMD K6/K6-K6-2 Processor
266MHz Cyrix 6x86MX Processor
256K L2 cache
Windows® 95/98 with 16 Mbytes RAM
Windows® NT 4.0 with 32 Mbytes RAM
2 Mbytes free hard disk space
Sound system with analog mic/speaker I/O (voice option)
One PCI slot "LA INFORMACION TECNICA DEL FABRICANTE PUEDE NO COINCIDIR O SUFRIR MODIFICACIONES SIN PREVIO AVISO"
